Marbled beef reimagined: a technology for creating a value-added product

· Valerii Korolko · 8 min read

Marbled beef reimagined: a technology for creating a value-added product

Marbled beef has a special status on the meat market. The characteristic pattern of thin fat inclusions is associated with steaks, premium restaurants, high juiciness and a corresponding price.

Natural marbling is formed during the animal's lifetime. It is influenced by genetics, breed, feeding, age, rearing conditions and other factors. For a meat processor, this means dependence on the characteristics and cost of the raw material.

Modern technologies make it possible to approach marbling differently: to create it technologically by introducing a specially prepared emulsion into the muscle tissue. After stabilisation, a characteristic marbled pattern appears inside the cut, and ordinary beef gains new product potential.

Can a more affordable lean beef cut be turned into a product with higher added value? We answer these questions.

What technologically marbled meat is

Technologically marbled meat is a product in which the fat pattern is formed not naturally while the animal is being raised, but during processing. The fat phase is introduced into the muscle tissue in the form of a specially prepared emulsion.

Marbled beef steak with streaks of fat

The principle is clear even without a technological education:

meat cut → prepared emulsion → injection → stabilisation → product with a characteristic marbled cross-section

Natural and technologically created marbling have different origins. It is therefore more accurate to regard such a product as a separate technological solution, rather than as a way of turning ordinary beef into Wagyu.

PRALLO® Marbled Beef Opti: a technology you will want to implement at your own plant

Prodservis has in its portfolio the functional ingredient PRALLO® Marbled Beef Opti from the German manufacturer VAN HEES, which allows you to take a fresh look at a familiar beef cut.

You cut into a finished steak: on top is a golden-brown crust, inside is juicy meat with a distinct marbled pattern. It is for the sake of such a result that you want not just to read about the technology in a catalogue, but to put it on an injector and test it on your own raw material.

PRALLO® Marbled Beef Opti is used to prepare a stable emulsion based on cold water and vegetable oil, which is injected directly into whole-muscle beef. After injection and stabilisation, a characteristic marbled structure forms inside the cut.

How the marbled structure is formed

For the basic process scheme, the emulsion is prepared as follows:

  • 56% cold water;
  • 35% vegetable oil;
  • 9% PRALLO® Marbled Beef Opti.

The working temperature of the emulsion is 2–5 °C. The recommended injection level is 35–40% in two passes. The prepared emulsion should be used within 4–6 hours, and after injection the meat should be left to stabilise for approximately 24 hours.

The official specification of PRALLO® Marbled Beef Opti also gives a dosage guideline of 85 g/l at 40% injection.

These parameters are a starting point. In real production, the result will depend on the cut, the structure of the muscle tissue, the injector, the temperature, the actual injection level and the subsequent cooking method.

Why this technology is of interest to Ukrainian producers

Let us look at beef through the eyes of the buyer. A good steak should look juicy, with an attractive cross-section, marbled streaks and a golden-brown crust after frying. For the producer, behind this picture lies a more pragmatic question: how much does the raw material cost and how much can be earned on the finished product?

The Ukrainian beef market has shrunk significantly in recent years. According to the State Statistics Service, domestic food consumption of beef and veal fell from approximately 347 thousand tonnes in 2015 to 204 thousand tonnes in 2024. That is about 41% over nine years.

For the producer, this is a signal: simply selling yet another piece of beef is becoming increasingly difficult. The buyer needs a clear reason to choose a particular product.

Technological marbling makes it possible to combine two demands: the buyer's wish for a juicy steak with an attractive marbled cross-section, and the producer's aim of creating a product with a predictable cost price and higher added value without having to work exclusively with expensive naturally marbled raw material.

What opens up for the producer is no longer a single product. It could be a steak for the home grill, a BBQ range, a restaurant preparation, thin slices for hot pot or a product for Asian cooking formats.

One cut. One technological idea. Several directions for new SKUs.

The economics of marbling: calculating per 100 kg of beef

A marbled cross-section attracts the buyer's attention. A juicy steak creates consumer value. For the producer there is another level of assessment: how much finished product can be obtained from every 100 kg of meat raw material.

Let us take the same starting point – 100 kg of beef.

Without the system, 79 kg of finished product remains after frying. The weight loss is 21%.

When the technology is used, 40% of emulsion is added to 100 kg of beef. After frying, the stated result is 132 kg of finished product.

100 kg of beef → 79 kg after frying
100 kg of beef + 40% emulsion → 132 kg after frying

Calculated on the same 100 kg of initial meat raw material, this is a 21% loss versus a +32% gain relative to the initial weight of the meat.

What the producer gets besides a marbled cut

An attractive cross-section is the first thing the buyer sees. For the producer, the value of the technology is much broader: it makes it possible to work simultaneously on yield, sensory characteristics, range and the future positioning of the product.

  • A familiar production process. The technology is based on emulsion preparation and injection, that is, on operations well known to meat processing enterprises. With the appropriate equipment in place, the new concept can be developed without setting up a separate production line.
  • Marbling you can control. The injection level, the choice of cut and the process parameters give the technologist the opportunity to tailor the product to a specific task: steak, thin slices, BBQ or an HoReCa format.
  • A flavour you can develop. The emulsion can be flavoured, so one technological base can become the foundation for different flavour concepts – from classic to BBQ or a special restaurant recipe.
  • Juiciness and tenderness of the cooked meat. The fat phase is distributed evenly inside the muscle tissue and melts during heating. A golden-brown crust forms on top, while the meat retains its texture and stays juicy.
  • A product made for the grill. The marbled cross-section works already on the shelf, and after cooking the golden-brown crust and juicy centre add to the visual effect. These are characteristics that do not need to be explained to the buyer at length.
  • Potential for frozen formats. The technology can be developed for frozen products, HoReCa and longer logistics.
  • The ability to work with the fat profile. Since the emulsion contains vegetable oil, the producer can choose its type according to the product's purpose. The specific fatty acid composition will be determined by the recipe of the finished product.
  • One technological principle – several SKUs. Steak may be only the beginning. The same technological base makes it possible to develop different formats for retail, HoReCa and private label.

Not just steak: where else marbled beef works

The classic steak is the most obvious product. But the marbled cross-section, portioning and quick cooking allow the concept to be extended much further.

  • Steaks and BBQ. Portioned steaks for the home grill, BBQ sets, meat for the plancha and professional preparations for restaurants.
  • Thin slices. The distinct marbled pattern becomes part of the visual value even before cooking. This format can be developed for quick frying and portioned restaurant serving.
  • Asian formats. Korean BBQ, teppanyaki, hot pot, sukiyaki and shabu-shabu are formats where thin slices of meat are cooked in a matter of minutes and where the appearance of the raw material is particularly important.
  • Raclette, plancha, hot stone, fondue. Here the meat becomes part of the gastronomic experience: the guest sees the product before cooking, the process itself and the result.
  • Retail and ready-to-cook. Portioned steaks, grill sets, and chilled or frozen products can form a separate range on the supermarket shelf.
  • HoReCa and private label. Restaurants, hotels, grill concepts, Asian cuisine venues and retail chains can receive a product adapted to their own format, portion weight, flavour profile and cooking method.

100 kg of beef can remain simply raw material. Or it can become the basis for several products, different sales channels and a new economics of the category.

From technological trial to commercial product

PRALLO® Marbled Beef Opti is worth evaluating more broadly than as a functional ingredient. What matters to the producer is not how the mixture looks in a specification, but what product it will help create, at what price that product can be sold and what will be left in the margin.

It is therefore logical to start the trial with a specific business objective: a steak for retail, a BBQ range, a restaurant preparation, thin slices for an Asian format or a private label product.

Next come the raw material, recipe, injection, stabilisation, the first cut and frying. After that, it is possible to calculate what determines the decision to launch: actual yield, heat treatment losses, cost price, selling price and margin.

Want to understand what PRALLO® Marbled Beef Opti can offer your production specifically?

Contact the Prodservis technologists. We will work out the technology on your raw material and equipment, evaluate the finished product and calculate its economic potential.

PRALLO® Marbled Beef Opti in brief

  • Manufacturer: VAN HEES, Germany.
  • Purpose: emulsifier for the production of semi-finished meat products.
  • Basic emulsion: 56% cold water, 35% vegetable oil, 9% PRALLO® Marbled Beef Opti.
  • Recommended injection level: 35–40% in two passes.
  • Working temperature of the emulsion: 2–5 °C.
  • Dosage guideline from the specification: 85 g/l at 40% injection.
  • Allergen: milk and milk products.

For manufacturers: Brine and pickle mixes for ready-to-eat delicacies

Products from the article

Read also

All articles

Marbled beef reimagined – Prodservis blog
Prodservis

{{ post.t }}

{{ post.date }}·{{ post.read }}·{{ post.author }}

The link may be outdated. See the latest articles below or all blog articles.

Have a question for a technologist?

A technologist will call you, clarify the task and offer a solution.

Check the number, with the country code, e.g. +380 XX XXX XX XXTick the consent box to send your requestCouldn’t send it. Please try again or call us: +38 050 425 50 04
Thank you! Your request has been received.