Sodium tripolyphosphate technical Polypray LDA GR (TG, GR, Anhydrous)

Sodium tripolyphosphate technical Polypray LDA GR (TG, GR, Anhydrous)
Manufacturer
PRAYON
Country
Belgium
Availability
On request

Description

Sodium tripolyphosphate, technical grade, Polypray LDA GR consists of anhydrous granules with a low bulk density of 0.4 g/cm3 from the Belgian manufacturer PRAYON. This light granulated product has a high P2O5 content because it contains no crystallisation water.

The catalogue offers this grade for ceramics and gypsum mixes. In ceramic bodies and slips, sodium tripolyphosphate acts as a deflocculant: it separates clay particles, lowers viscosity and makes it possible to reduce the amount of water. As a result, less moisture has to be removed during drying. In gypsum, the phosphate is adsorbed on crystal nuclei and slows setting, so the mortar remains workable for longer.

  • Bulk density: 0.4 g/cm3 (25 lbs/ft3)
  • P2O5: 58 %
  • pH of 1% solution: 10.0
  • Na2O: 42 %
  • Solubility at 20 °C: 14 g/100 g of water

The anhydrous form actively absorbs moisture, so opened packaging should not be left unprotected. The high P2O5 content means that less product is needed for the same effect than with a hydrated grade. Light granules are better dosed by weight than by volume, as the bulk density is low. A Prodservis technologist will help select the dosage of sodium tripolyphosphate, technical grade, Polypray LDA GR for a slip or gypsum mix.

A technologist will send prices, availability and documents: +38 050 425 50 04, dd@prodservis.com.

Similar products

Technical Sodium Tripolyphosphate Polypray LDA GR – Prodservis
Prodservis

{{ pH1 }}{{ pMark }}

{{ pLead }}

{{ nfText }}

Go to the catalogueTechnologist consultation
{{ pName }} The product photo is for illustration only and may differ from the actual packaging.
{{ sp.k }}{{ sp.v }}

Similar products

Full catalogue →

We will select an ingredient for your recipe

A technologist will call you, clarify the task and offer a solution.

Check the number, with the country code, e.g. +380 XX XXX XX XXTick the consent box to send your requestCouldn’t send it. Please try again or call us: +38 050 425 50 04
Thank you! Your request has been received.