Sodium tripolyphosphate technical Polypray HD/HT (TG, Powder, Anhydrous)

Sodium tripolyphosphate technical Polypray HD/HT (TG, Powder, Anhydrous)
Manufacturer
PRAYON
Country
Belgium
Availability
On request
Packaging
25 kg

Composition

Technical-grade sodium tripolyphosphate

Dosage

0.2–0.4 kg/100 kg

Description

Polypray HD/HT is a technical sodium tripolyphosphate (STPP) from the Belgian manufacturer PRAYON with a pH of 9.5-10.2. It is used as an additive to gypsum and cement mixes, where it regulates crystal growth and setting speed.

Gypsum. STPP changes the ability of gypsum (dihydrate) crystals to grow, which leads to an increase in their size and a change in shape from needle-like to short prismatic (plate-like). This process lowers the concentration of ions in the liquid phase of the gypsum, reducing its supersaturation. The phosphate inhibits ion diffusion and crystal growth through chemisorption on the surface of the gypsum crystals. This is the underlying reason for the slower crystal growth: nucleation (the initial stage of crystal growth) is reduced, and therefore so is the rate at which new crystals form. As a result, larger gypsum crystals form, which may impair the strength of the final material because of the variety of crystals obtained. Therefore, the dosage of Polypray HD/HT is selected taking into account the strength requirements for the product.

Cement and concrete. STPP affects setting and hardening time and improves the strength and structure of the final product. In cement, STPP is used to slow down the hydration process and as a deflocculant, reducing the setting speed. Adding STPP retards setting and changes the viscosity of the cement, helping to disperse the cement ingredients to improve uniformity. As a result, a denser structure with improved overall characteristics, including strength, is formed. Cement drying is an exothermic process in which heat is released as it sets.

At the same time, STPP can affect the early hydration of cement, accelerating its hardening, which proceeds through four stages. The first stage is early growth, where the cement remains fresh but is already starting to harden. Adding a deflocculant helps make the product more fluid (or viscous, depending on the dosage) for easier transport and handling, preventing this process. STPP can also be used to delay setting time, which reduces porosity and increases the density of the cement. After all, the structural bonding of the ingredients becomes more effective, which in turn increases strength.

A Prodservis technologist will help select the dosage of Polypray HD/HT for a gypsum or cement mix.

A technologist will send prices, availability and documents: +38 050 425 50 04, dd@prodservis.com.

Similar products

Gypsum Plasticiser Polypray HD/HT (STPP) – Prodservis
Prodservis

{{ pH1 }}{{ pMark }}

{{ pLead }}

{{ nfText }}

Go to the catalogueTechnologist consultation
{{ pName }} The product photo is for illustration only and may differ from the actual packaging.
{{ sp.k }}{{ sp.v }}

Similar products

Full catalogue →

We will select an ingredient for your recipe

A technologist will call you, clarify the task and offer a solution.

Check the number, with the country code, e.g. +380 XX XXX XX XXTick the consent box to send your requestCouldn’t send it. Please try again or call us: +38 050 425 50 04
Thank you! Your request has been received.